Display Setting Screen (Main) - Ikegami MLW-3226C Instruction Manual

• Language
• Reverse
• DVI1-EQ/DVI2-EQ : This cable compensation function helps suppress noises when

5.6 Display Setting Screen (main)

This screen is used to make the input signal display aspect ratio, horizontal and vertical
display positions and sizes, and other settings.
Screen display
Status User Display
Aspect
Over Scan
H.Position
V.Position
H.Size
V.Size
Keep Aspect
Clock
Phase
AUTO
UNDO
○ IN1: CH name - Signal name
IN2: CH name - Signal name
Display setting screen description (main)
• Aspect : Used to switch the video signal aspect ratio from Normal, Full and
• Over Scan : Used to select the display size with an overscan of 5% or 10%.
• H/V. Position : Used to adjust the horizontal and vertical positions onscreen.
: It is possible to switch the language used for displaying.
: This is a function for inverting the screen display:
OFF : Normal display; ⇔ : Horizontal ip display;
: Vertical ip display;
: Vertical and horizontal ip display;
⇔
COM : Externally controlled display
When double-screen display is used, only the normal display
mode can be selected.
the DVI is connected using a long cable and suffers from noises.
Image Color Memory
Normal
OFF
0
0
0
0
OFF
50
Auto
Cancel
Switch behavior description
Clear. The switchable types depend on the type of input signal.
Normal
NTSC/PAL
1440×1080 display
Black zones on
both sides
HD
1920x1080 display
Move toward the plus side to shift the screen to top right.
Move toward the minus side to shift the screen to bottom left.
P-Pre
Normal/Full/Clear
OFF/5%/10%
-200 - +200
-200 - +200
-200 - +200
-200 - +200
ON/OFF
0 - 100
Auto/1-48
Cancel/ADJ
Full
1920×1080 display
720×540 display
Cut off at top
and bottom
1920x1080 display 1920x1080 display
13
5. Operation
Clear