Changing The Air And Fluid Nozzles; Changing The Fluid Needle - Krautzberger M-10 Operating Instructions Manual

Automatic spray gun M -10
7.4

Changing the air and fluid nozzles

Removing the nozzles
1. Clean automatic spray gun (
Fig. 6: Removing the nozzles
2. Dismantle circlip ( Fig. 6/4) using suitable tools.
3. Loosen the knurl nut ( Fig. 63).
4. Remove the air nozzle ( Fig. 6/2).
5. Unscrew the fluid nozzle ( Fig. 6/1) with a fork wrench.
Always change the fluid nozzle and needle together (
fluid needle' on page 29).
Attaching the nozzles
1. Tighten the fluid nozzle ( Fig. 6/1) with a fork wrench.
2. Attach the air nozzle ( Fig. 6/2) and tighten it with the knurl nut ( Fig. 6/3).
3. Insert circlip ( Fig. 6/4) using suitable tools.
7.5

Changing the fluid needle

– Always change the fluid nozzle and needle together (
and fluid nozzles' on page 29).
– Lightly grease sliding parts. Use special grease of Krautzberger (contact data see last
page).
■ 200-0142
Ä Chapter 7.3 'Cleaning' on page 27).
Ä Chapter 7.5 'Changing the
Ä Chapter 7.4 'Changing the air
ENGLISH
GB–29