Table of Contents
Advertisement
Automatic spray gun M14
8.4
Changing the fluid nozzle and the air nozzle
Removing the nozzles
1.
Clean automatic spray gun (
on page 27).
Fig. 6: Removing the nozzles
2.
Dismantle circlip ( Fig. 6/4) using suitable tools.
3.
Loosen cap nut ( Fig. 6/3).
4.
Remove the air nozzle ( Fig. 6/2).
5.
Unscrew the fluid nozzle ( Fig. 6/1) with a fork wrench.
Always replace the fluid nozzle and fluid needle at the same time (
'Changing the fluid needle' on page 30).
Attaching the nozzles
1.
Tighten the fluid nozzle ( Fig. 6/1) with a fork wrench.
2.
Attach air nozzle ( Fig. 6/2) and tighten it with the cap nut ( Fig. 6/3).
3.
Insert circlip ( Fig. 6/4) using suitable tools.
■ 200-0153
Ä Chapter 8.3 'Cleaning the automatic spray gun'
ENGLISH
Ä Chapter 8.5
GB–29
Advertisement
Table of Contents
