Customer Care - Krautzberger M-10 Operating Instructions Manual

Spray pattern
-
8.1

Customer Care

Krautzberger GmbH
Customer service
Stockbornstr. 13
65343 Eltville am Rhein
+49 6123 - 698151
customercare@krautzberger.com
GB–38
Operating instructions
Error
Spray pattern change
after reassembly.
Atomisers for round
and flat jets can no
longer be regulated
separately
Cause
Dirty or damaged
n
fluid nozzle
n Air distributor ring
installed wrong
way
mail@krautzberger.com, www.krautzberger.com
T-Dok-213-GB-Rev.2
Remedy
Clean (
n
Ä Chapter 7.3
'Cleaning'
on page 27) or
replace fluid
nozzle (
Ä Chapter 7.4
'Changing the air
and fluid nozzles'
on page 29)
n Remove air dis-
tributor ring and
install correctly