Troubleshooting - Krautzberger M-10 Operating Instructions Manual

8 Troubleshooting

Personnel:
n Qualified personnel
If the fault is not included in the following table or if it cannot be eliminated with the measures
described, contact Customer Care.
Protective equipment:
The selection of the personal protective equipment depends on the utilised medium of the system
owner. The information provided by the medium manufacturer indicated on the safety data sheet
must be adhered to in order to ensure the proper selection of personal protective equipment.
Spray pattern
GB–36
Operating instructions
Error
Normal flat jet spray pattern
Spray pattern too
heavy towards the top
and towards the
bottom
Spray pattern concen-
trated on the left or
right side
Heavy application in
the centre of the spray
pattern
Cause
n Dirty air nozzle
n Dirty fluid nozzle
Dirty air nozzle
n
Dirty fluid nozzle
n
n Too much mate-
rial
n Material too thick
mail@krautzberger.com, www.krautzberger.com
T-Dok-213-GB-Rev.2
Remedy
Clean nozzles (
Ä Chapter 7.3
'Cleaning' on page 27)
Clean nozzles (
Ä Chapter 7.3
'Cleaning' on page 27)
n Reduce material
supply
n Thin material