Table of Contents
Advertisement
Automatic spray gun A15 eco
7.4
Changing the fluid needle
Removing fluid needle
1.
Clean automatic spray gun (
Fig. 9: Removing fluid needle
2.
WARNING!
The closing piece ( Fig. 9/4) is under spring force!
Carefully unscrew the entire closing piece ( Fig. 9/4).
3.
Remove the spring ( Fig. 9/3).
4.
Take the entire valve shaft ( Fig. 9/2) out of the main element ( Fig. 9/1).
Fig. 10: Removing fluid needle
5.
Loosen the nut ( Fig. 10/4) of the valve shaft pipe ( Fig. 10/1).
6.
Remove the spring ( Fig. 10/3) and fluid needle ( Fig. 10/2) from the valve shaft pipe (
Fig. 10/1).
200-0383
Ä Chapter 7.2 'Cleaning automatic spray gun' on page 29).
ENGLISH
GB–31
Advertisement
Table of Contents
