Changing The Air And Fluid Nozzles - Krautzberger A-10 Operating Instructions Manual

Automatic spray gun A-10
7.3

Changing the air and fluid nozzles

Removing the nozzles
1. Clean automatic spray gun (
Fig. 9: Changing the nozzles
2.
WARNING!
The closing piece (Fig. 9/5) is under spring force!
Carefully unscrew the closing piece (Fig. 9/5).
3. Loosen clamping nut (Fig. 9/1).
4. Remove the air nozzle (Fig. 9/2).
5. Unscrew fluid nozzle (Fig. 9/3).
Always change the fluid nozzle (Fig. 9/3) and fluid needle (Fig. 9/4) at the same time
Ä Chapter 7.4 'Changing the fluid needle' on page 26).
(
Attaching the nozzles
1. Tighten the fluid nozzle (Fig. 9/3).
2. Attach the air nozzle (Fig. 9/2) and tighten it with the clamping nut (Fig. 9/1).
3. Screw on the closing piece (Fig. 9/5).
■ 200-0148
Ä Chapter 7.2 'Cleaning spray guns' on page 24)
ENGLISH
GB–25