Automatic spray gun M -10
6.
Carefully push piston ( Fig. 13/6) with needle ( Fig. 13/5) into the control section (
Fig. 13/1).
7.
Insert compression spring ( Fig. 13/7).
8.
Screw valve seal ( Fig. 13/8) into control section ( Fig. 13/1) and tighten with fork wrench.
7.6
Changing needle seals
Lightly grease sliding parts. Use special grease of Krautzberger (contact data see last page).
■ 200-0142
ENGLISH
GB–33