Operation
7.13 "Adjust LUT" menu
7.13 "Adjust LUT" menu
Note
• The "Adjust LUT" menu is displayed only if the "User" setting is selected in the "LUT"
menu
• After each parameter change, the LUT in the device is immediately recalculated. This is
indicated in the OSD menu by the message: "Gamma table being recalculated". When
the calculation is complete, the message disappears from the OSD.
CAUTION
Check the gray levels
After each LUT recalculation performed in the "Adjust LUT" menu, it is absolutely neces-
sary to apply an appropriate test pattern and check that all gray levels are displayed cor-
rectly.
Function
Model
Lmin
50
Values
•
Native
•
CIE 1976
•
CIE (DIN 6174)
•
CRT
•
DICOM
•
Gamma 2.0, 2.2,
2.5, 2.7, 3.0, 3.3
•
Log.Lum.linear
Default: DICOM
0 - 250
2
Default: 40 (0.8 cd/m
)
Description
The gamma model, which serves as the basis for re-
calculating the LUT, can be selected here.
Note: When "Natural" is selected, only the value for
Lmax can be changed. All other functions are hid-
den.
Adapt the minimum black value between 0 and 5 cd/
2
m
CuratOR LX491W
Instructions for Use, 02/2018