Eizo CuratOR LX491W Instructions For Use Manual page 43

Function
PiP adjustments
PiP size
H-position
V-position
Transparency
Saturation adjustment Enabled / Disabled
Deinterlacing
Color / Monochrome
CuratOR LX491W
Instructions for Use, 02/2018
Values
The "PiP adjustments" menu only appears when the "Picture in Picture
(PiP)" setting is active.
Note: When initially selecting sources the "PiP adjustments" function is not
always displayed. In this case, change to another OSD menu (such as
"LUT") and then back to the "Signal" menu. The "PiP adjustments" function
is now displayed.
Slider control
Slider control
Slider control
Default: Disabled
Field to frame
Static mesh
Normal
Default: Normal
Color
Monochrome
YPbPr/YCbCr
Default: Color
Description
Select the "Picture in Picture (PiP)" window
size
Set the horizontal position of the "Picture in
Picture (PiP)" window
Set the vertical position of the "Picture in Pic-
ture (PiP)" window
Select the "Picture in Picture (PiP)" window
background ("opaque" or "transparent")
Activates the color adjustment of "Saturation"
in the main "Picture" menu.
Setting the "Deinterlacing" method
Note: The "Deinterlacing" function is shown
only in conjunction with a supporting signal
source.
Note: If an interlaced signal is connected to a
signal input (except for the 3G-SDI input) and
the "Normal" setting is selected, brightness is
reduced by approx. 15% due to the color space
conversion of the deinterlacing.
The deinterlacing settings "Field to frame" and
"Static mesh" use other deinterlacing methods
and cause only a slight reduction in brightness.
The "Static mesh" setting is optimized for still
images, but could cause comb effects in mov-
ing images.
The "Field to frame" setting is optimized for
moving images, but could cause comb effects
in still images.
Switch signal between monochrome and
color
If "Color" is set, a monochrome signal is dis-
played green. For correct gray scale represen-
tation, select the "Monochrome" setting.
Operation
7.8 "Signal" menu
43