Eizo CuratOR LX491W Instructions For Use Manual page 38

Operation
7.6 "Picture" menu
Function
Brightness
Contrast
Backlight
Color temperature
Set user color
Red
Green
Blue
Hue
Saturation
38
Values Description
Slider control Set brightness
Default: 50
Adapting the representation of darker picture areas.
Note: The brightness settings are already optimized
for digital DVI signals.
Do not change these values manually, as this can
negatively impact picture quality (loss of gray scales).
Slider control
Set contrast
Default: 50 Adapting the representation of brighter picture areas.
Note: The contrast settings are already optimized for
digital DVI signals.
Do not change these values manually, as this can
negatively impact picture quality (loss of gray scales).
Slider control Adjust brightness of monitor backlight
Adjustment of overall brightness to ambient lighting.
Note: The backlight settings always apply for all win-
dows.
Native Set the desired color temperature or hue
9300°K The color temperatures can be selected from among
three fixed settings or one adjustable setting.
7300°K
It is possible to define a different color temperature
User
for each video input.
Default: Native
Define variable color temperature
The color setting defined here can be set in the
"Color temperature" menu item using the "User" set-
ting.
Note: If the color coordinate is adjusted with this
function, some color levels may be lost. To prevent a
loss in color levels, calibrate the LUT color point with
suitable QA software.
Slider control Select red component of display.
Default: 50
Slider control Select green component of display.
Default: 50
Slider control Select blue component of display.
Default: 50
Slider control Set the color hues for RGB and video signals.
Note: "Hue" may only be set for S-Video or Compos-
Default: 50
ite signals.
Slider control Set the color saturation for RGB and video signals.
Note: This menu is not displayed for the mono-
Default: 50
chrome CVBS signal.
CuratOR LX491W
Instructions for Use, 02/2018