Eizo CuratOR LX491W Instructions For Use Manual page 42

Full hd 49" lcd monitor
Table of Contents

Advertisement

Operation
7.8 "Signal" menu
Function
Picture layout PaP,
PiP, PoP
Set picture layout
Layout format
Main window source
2nd Window source
Synchronization window Main window (1)
42
Values
Enabled / Disabled
Default: Disabled
Picture in Picture (PiP)
Picture and Picture (PaP)
Picture over Picture
(PoP)
Default: Picture in Picture
(PiP)
PiP/PaP window (2)
Default: Main window (1)
Description
Switch the preconfigured picture layout
(PaP; PiP; PoP) on or off
When "Picture layout PaP, PiP, PoP" is en-
abled, an "Active adjustment window" se-
lection appears in the main OSD menus for
"Picture", "Image", and "Signal".
The settings for the OSD window can be
applied to the main or secondary window.
Note: The number displayed on the right side
of the OSD window indicates which window is
currently active for the setting ("1": main win-
dow, "2": secondary window)
The following picture layouts can be selected
using this function:
Picture in Picture (PiP):
The image content of the secondary video
source is displayed on the main image (primary
video source).
Picture and Picture (PaP):
Two images from a primary and a secondary
video source are displayed next to one an-
other.
Picture over Picture (PoP):
Up to five images of various video sources may
be displayed next to one another.
The image from the primary video source is
magnified and displayed in the lower sec-
tion of the window.
The other images are displayed in a smaller
format in the upper section of the window.
Note: For "Picture over Picture (PoP) images"
there is a time delay when displaying images.
This setting may not be used for live mode.
Select the video sources displayed in the re-
spective "Picture in Picture (PiP)", "Picture and
Picture (PaP)", and "Picture over Picture
(PoP)" windows.
See also
Picture layout (PaP, PiP, PoP) [} 35]
for compatible video source combinations.
Select whether the main or secondary window
serves as the synchronization window.
Note: The "Synchronization Window" menu is
only available when the "Picture in Picture
(PiP)" setting is active.
Instructions for Use, 02/2018
CuratOR LX491W

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents