Commissioning
6.6 Adapting the monitor using Force Mode
A non-interlaced image is output to the screen such that all horizontal lines are scanned
from top to bottom in a single scan.
Horizontal timing diagram (the vertical timing diagram is identical)
Fig.:
Timing diagram
Force Mode menu
Horizontal resolution
Vertical resolution
Total horizontal lines
Horizontal blank pixels
Vertical blank pixels
6.6.3 Entering timing data
If you know or have already determined the timing data, you can enter it directly in the OSD
"Force Mode" menu.
Entering known timing data
1. Open a test pattern with a clearly defined border (e.g. SMPTE image).
2. Open the "Force Mode" menu is the OSD.
28
Timing diagram
3 - Active video (horizontal resolution)
3 - Active video (vertical resolution)
5 – Total number of lines (horizontal)
4 – Front Porch (horizontal)
4 – Front Porch (vertical)
Instructions for Use, 02/2018
CuratOR LX491W