Force Mode" Menu - Eizo CuratOR LX491W Instructions For Use Manual

7.12 "Force Mode" menu

Force Mode is used to set the timing of video sources that cannot be displayed with the tim-
ings saved in the monitor.
Function
Horizontal Resolution
Vertical Resolution
Total horizontal lines
Horizontal blank pixel
Vertical blank pixel
Mode
Execute function...
CuratOR LX491W
Instructions for Use, 02/2018
Values Description
Set the horizontal resolution in the active resolution
range.
Set the vertical resolution in the active resolution
range.
If the resolution is known, this can be used as the ap-
proximation value. The following applies: "Total hori-
zontal lines" > "Horizontal resolution".
A larger "Horizontal resolution" can result in the im-
age being split vertically.
Set the horizontal blanking interval.
Set the vertical blanking interval.
Active / Start / Set Force Mode
Inactive
•
Default: Inactive
•
•
See also Determining the timing data
When "Start" is selected in Mode, the set video reso-
lution is executed.
7.12 "Force Mode" menu
When "Active" is selected, the specified timing
values are applied with "Execute function...".
Force Mode is switched off when "Inactive" is se-
lected.
When "Start" is selected, the start values for the
timing are determined using "Execute function...".
Operation
49