Eizo RadiForce LX470W Instruction Manual
  1. Manuals
  2. Brands
  3. Eizo Manuals
  4. Monitor
  5. RadiForce LX470W
  6. Instruction manual
Eizo RadiForce LX470W Instruction Manual

Eizo RadiForce LX470W Instruction Manual

2 mp 47" color flat panel monitor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
display
SOLUTIONS
SOLUTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RadiForce LX470W and is the answer not in the manual?

Questions and answers

Related Manuals for Eizo RadiForce LX470W

Summary of Contents for Eizo RadiForce LX470W

  • Page 1 display SOLUTIONS SOLUTIONS...
  • Page 3 ___________________ RadiForce® LX470W Introduction ___________________ Safety notes ___________________ Description LCD monitors for ___________________ medical applications Application planning 2 MP 47" Color Flat Panel Monitor ___________________ RadiForce® LX470W Mounting ___________________ Connecting Instruction Manual ___________________ Commissioning ___________________ Software description ___________________ Operate ___________________ Service and maintenance ___________________ Technical specifications...
  • Page 4 Note the following: WARNING EIZO products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by EIZO. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 5: Table Of Contents

    Table of contents Introduction..............................7 Contents of this document ......................7 Additional documentation.......................7 Safety notes............................... 9 General safety notes........................10 Product-specific safety notes .......................14 Description............................... 15 Scope of delivery .........................15 Applications..........................15 Important features........................16 Application planning..........................19 Installation site ..........................19 Distances and arrangement of units ....................20 Mounting..............................
  • Page 6 Table of contents System settings........................... 48 7.5.1 Avoidance of image sticking......................48 7.5.2 Adjusting the image geometry ....................48 7.5.3 Monitor adjustment – video source / graphics card ..............48 7.5.4 Power management ........................50 7.5.5 Check for pixel defects........................ 50 Software description ..........................
  • Page 7 Table of contents Appendix..............................71 Guidance and manufacturer's declaration – electromagnetic emissions........71 Markings and symbols on the monitor ..................72 Warranty............................74 Repairs............................74 Environmental protection ......................74 Accessory devices ........................75 Trademarks ..........................75 Contact............................75 China RoHS (Restriction of Hazardous Substances) ..............76 List of abbreviations..........................79 Index................................
  • Page 8 Table of contents RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...

  • Page 9: Introduction

    The contents of this document are neither part of a previous or existing agreement, commitment or legal relationship, nor does it modify such. Additional documentation Note Additional information These instructions are available on the supplied CD-ROM and on the Internet page of Medical Monitor Solutions (http://www.eizo.eu). RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...
  • Page 10 Introduction 1.2 Additional documentation RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...

  • Page 11: Safety Notes

    ● Please ensure that all necessary steps are taken to avoid violations or incorrect diagnoses. ● Although the monitor itself does not require any maintenance, EIZO recommends cleaning the monitor on a regular basis and performing image quality reviews in accordance with all applicable local regulations.

  • Page 12: General Safety Notes

    Safety notes 2.1 General safety notes General safety notes Flawless, safe and reliable operation of the equipment assumes that it has been professionally transported, stored, mounted and installed as well as careful operator control and service. The units may only be used for applications for which monitors are normally used.
  • Page 13 Please ensure that all steps are taken to avoid injuries or incorrect diagnoses. If your application or local regulations require calibration, EIZO recommends the use of a QA software package to facilitate quality control and documentation of the results. Observe all regulations of the country in which the device is used.
  • Page 14 Safety notes 2.1 General safety notes CAUTION Failure to observe warnings may result in substantial damage to property Ensure sufficient heat dissipation To ensure proper air circulation, observe appropriate spacing between neighboring objects when placing or mounting the devices. Ventilation slots are provided on the housing base, the top of the cover, the rear panel and the side panels.
  • Page 15 Safety notes 2.1 General safety notes CAUTION Touching the screen surface can result in brief disturbances to the image Due to mechanical pressure or electrostatic discharging, touching the screen can result in brief disturbances to the image. Only switch on cold displays following their adaptation to room temperature If the display is brought into a room with a higher or rising temperature, condensation is formed inside and outside the unit.

  • Page 16: Product-Specific Safety Notes

    Safety notes 2.2 Product-specific safety notes Product-specific safety notes If the equipment has been designed or, when required, modified for connection to an IT power distribution system, the equipment installation instructions shall so state. DANGER Touching the monitor A patient and the monitor must not be touched simultaneously by a person or chain of persons.

  • Page 17: Description

    Description Scope of delivery Note EIZO recommends that you keep the packaging material for subsequent transport of the monitor. RadiForce® LX470W 2 MP 47" Color Flat Panel Monitor. RadiForce® LX470W white Order No.: 6GF6260-5FA10 RadiForce® LX470W black Order No.: 6GF6260-5FA11 Additional components in scope of delivery ●...

  • Page 18: Important Features

    (ISS) ensures consistent luminance levels using an integral light sensor in the center of the backlight. Using the EIZO QA software from EIZO and an external photometer option obtainable from EIZO, the ISS sensor can be automatically adjusted to ensure traceable calibration.
  • Page 19 3.3 Important features Settings for optimizing the application The reproduction properties can be adapted using the EIZO QA software to achieve optimum picture display. The monitor can be adapted to the local lighting conditions using the five preset practice-oriented Look Up Tables.
  • Page 20 Description 3.3 Important features RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...

  • Page 21: Application Planning

    Application planning Installation site Provide adequate ventilation Ventilation holes are located on the rear of the housing. These ventilation holes must not be covered or closed, since otherwise the heat generated in the device cannot be dissipated sufficiently. Ensure unimpeded access to the power switch CAUTION Power switches and connections must be accessible at all times When assembling or installing the device, ensure that the power switch and the...

  • Page 22: Distances And Arrangement Of Units

    Application planning 4.2 Distances and arrangement of units Change of environment If the unit is brought into a warm environment from a cold one, condensation may form in the unit. The unit should not be switched on until all the condensed water has evaporated, including that inside the unit.

  • Page 23: Mounting

    Mounting Mounting the device Taking the device out of the packaging CAUTION • The device must be removed from the packaging and carried by at least 2 persons. • Wear appropriate protection to prevent injuries should the device be dropped. 1.

  • Page 24: Mounting The Device In Portrait Mode

    Mounting 5.2 Mounting the device in portrait mode Accessories EIZO recommends the following accessories: Stand FST4700 Order No.: 6GF6988-8BA03 Wall mount FST5600 Order No.: 6GF6988-8BA02 See also General safety notes (Page 10) Mounting the device in portrait mode You can also mount the monitor in portrait mode. Mounting is only possible under the following conditions: ●...

  • Page 25: Connecting

    Connecting General connection information CAUTION All information and warnings related to this product must be observed to ensure danger- free operation. CAUTION Changes to device • Device settings may only be adjusted by trained service personnel; otherwise, the warranty is void. •...
  • Page 26 Connecting 6.1 General connection information CAUTION Completely disconnect device from the supply mains To completely disconnect the device from the supply mains, toggle the power switch on the rear of the monitor: • Move the power switch to the "OFF" position. The device is now switched off and disconnected from the supply mains.

  • Page 27: Connector Location

    Connecting 6.2 Connector location Connector location The connectors are located in the connection panel under the cover on the rear of the monitor. ① OSD operation ② Screws for the cover ③ Cover ④ Strain relief for the cables Figure 6-1 Rear view of RadiForce®...

  • Page 28: Connection Panel

    Connecting 6.3 Connection panel Connection panel Connections A connection panel for the signals and power supply is located at the rear of the Color Flat Panel Monitor. ① ⑪ USB-A 5 V/1 A ② ⑫ USB-B HD-SDI In ③ ⑬ Composite Out HD-SDI Out ④...

  • Page 29: Connecting The Signal Cables

    Connecting 6.4 Connecting the signal cables Connecting the signal cables CAUTION When installing the cable, avoid danger of tripping Route the cable such that it cannot be tripped over. CAUTION Use identical cable lengths for R, G and B signals When connecting to the RGB analog sockets, the three cables for the R, G and B signals must be of equal length.
  • Page 30 Connecting 6.4 Connecting the signal cables HDMI socket Two types of cable can be connected to the HDMI socket: ● HDMI cable ● DVI cable (digital mode) with a DVI to HDMI adapter or cable HD-SDI socket (BNC) ● Connect the video cable for the HD-SDI input to the BNC socket. 4-pin mini-DIN socket (video input) ●...

  • Page 31: Connecting The Power Cord

    Connecting 6.5 Connecting the power cord Connecting the power cord DANGER Only connect device to a supply mains with a PE conductor WARNING: To avoid risk of electric shock, this equipment must only be connected to a supply mains with protective earth. CAUTION Device fuses must only be replaced by authorized repair centers Only have equipment fuses replaced by authorized repair centers as such faults are caused...
  • Page 32 Connecting 6.5 Connecting the power cord RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...

  • Page 33: Commissioning

    Switching on the unit ● Switch the device on using the power switch. The EIZO logo is displayed for a short time. ● If no signal is present, a black image is output on the monitor. ● If a signal is present, the black image disappears.

  • Page 34: Remote Control

    Commissioning 7.3 Remote control Key functions In the OSD menu, the keys have the following functions: Action Open OSD menu • Toggle • Navigate between submenu/tabs • Decrease/change value • Navigate between submenu/tabs • Increase/change value • Leave OSD or submenu (settings are retained) Remote control ①...

  • Page 35: Description Of Osd Menu

    Commissioning 7.4 Description of OSD menu Function keys of the remote control Overview of function keys of the remote control: Action Menu L Navigation tab to the left Menu R Navigation tab to the right Escape Exit OSD Navigation in the menu up Left Close submenu Right...
  • Page 36 Commissioning 7.4 Description of OSD menu Main menu Function Adjustment / adjustment Description range Picture quality Brightness Slider control Set brightness Default: 50 Adapting the representation of darker picture areas. Note The brightness settings are already optimized for digital DVI signals. Do not change the values •...
  • Page 37 If the color location setting is corrected with "Set user color", some color levels may be lost. To prevent the loss of color levels, carry out a color • correction via "LUT" using the EIZO QA software. →Red Slider control Select red component of display Default: 50 →Green...
  • Page 38 Commissioning 7.4 Description of OSD menu Main menu Function Adjustment / adjustment Description range Image adjustment Perform auto adjustment… Execute Execution of autofunction "Position", "Phase" and "Frequency" are set automatically. Note "Perform auto adjustment" can only be used with the analog signal inputs.
  • Page 39 Commissioning 7.4 Description of OSD menu Main menu Function Adjustment / adjustment Description range Sharpness filter Slider control Sharpness setting can be selected in order to reduce scaling artifacts or to make the image appear "softer" Note You can only use the "Sharpness filter"...
  • Page 40 Commissioning 7.4 Description of OSD menu Main menu Function Adjustment / adjustment Description range V-Position Slider control Shift picture in vertical direction With identical monitor and graphics card settings, the complete picture to be displayed fills the display area of the monitor with the exact number of pixels.
  • Page 41 Commissioning 7.4 Description of OSD menu Main menu Function Adjustment / adjustment Description range Source scan On / Off If no signal is displayed: Activate/deactivate the Default: On automatic source scan If the displayed source is no longer available, the monitor automatically searches for the next available source.
  • Page 42 Commissioning 7.4 Description of OSD menu Main menu Function Adjustment / adjustment Description range Set picture layout Setting the picture layout → Layout format The following picture layouts Picture in picture (PiP) • can be selected using the Picture and picture (PaP) •...
  • Page 43 Commissioning 7.4 Description of OSD menu Main menu Function Adjustment / adjustment Description range → Synchronization window Set which of the main or Main window (1) • secondary windows is PiP window (2) • selected as the Default: Main window (1) synchronization window Note The menu "Synchronization...
  • Page 44 Commissioning 7.4 Description of OSD menu Main menu Function Adjustment / adjustment Description range ADC calibration... Execute Automatically calibrate A/D converter for the applied video level The video level range of the system is checked, and the monitor set accordingly. This results in optimum adjustment of the individual RGB A/D converters to the...
  • Page 45 Commissioning 7.4 Description of OSD menu Main menu Function Adjustment / adjustment Description range Switch loop Slider control The following four parameters are of relevance Default: 1 to this setting: H frequency • V frequency • V total • Interlaced/non-Interlaced •...
  • Page 46 Commissioning 7.4 Description of OSD menu Main menu Function Adjustment / adjustment Description range → OSD time out Close the OSD menu after a • defined time • 10 s • 30 s • 60 s • Default: Off → Position Setting of position of OSD Up left •...
  • Page 47 Commissioning 7.4 Description of OSD menu Main menu Function Adjustment / adjustment Description range Source selection sequence The Source selection sequence defines the sequence in which the sources are to be automatically searched Source selection is interrupted as soon as the first source with an active video signal has been found.

  • Page 48: Lock/Unlock Osd Menu

    Commissioning 7.4 Description of OSD menu 7.4.3 Lock/unlock OSD menu CAUTION Locking/unlocking of the OSD is only permissible for authorized servicing personnel. The OSD must be locked if a faulty operation on the part of the user could have a detrimental effect on the approved application of the monitor.
  • Page 49 Commissioning 7.4 Description of OSD menu Selection of image sources The main image source can be selected. The four other image sources are automatically added in accordance with the table "Possible image source combination". NOTICE Live images must not be displayed in PoP mode With "Picture on picture (PoP)", the images are displayed with a delay.

  • Page 50: System Settings

    Commissioning 7.5 System settings System settings 7.5.1 Avoidance of image sticking ● Use a screen saver function in order to reduce "image sticking" that may occur with TFT displays. ● If the device is no longer required: Switch off the device. ●...
  • Page 51 Note that the calibration in the look-up table must not be affected by these settings. EIZO GmbH monitors are calibrated at the factory and retain these settings: 1. To reduce the brightness using the OSD control elements, use a picture with 0% gray value (black) and a suitable measuring instrument (we recommend the Serial Spot Meter).

  • Page 52: Power Management

    During start-up you can check the monitor, e.g. using the EIZO QA software, as follows: ● Generate a black test screen and examine the screen for luminous pixel errors.

  • Page 53: Software Description

    Note The RadiForce® LX470W monitor is supported by the quality assurance software from EIZO. QA software EIZO offers software with extensive options for adjusting and verifying an LCD monitor. For further information, refer to the software documentation. See also http://www.eizo.eu (http://www.eizo.eu) http://www.radiforce.com (http://www.radiforce.com)
  • Page 54 Software description 8.1 Program for changing the display settings RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...

  • Page 55: Operate

    Operate Note for users CAUTION Settings must not be changed by users None of the settings may be changed on site by the user. This also applies to settings made using the monitor keys. These are therefore locked for certain applications. If settings have to be changed, please contact the responsible service department.
  • Page 56 Operate 9.2 Switching on the monitor RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...

  • Page 57: Service And Maintenance

    Service and maintenance 10.1 Cleaning CAUTION Device maintenance, cleaning and disinfecting • The front panel is extremely sensitive to mechanical damage. Avoid all scratches, knocks etc.! • Remove drops of liquid immediately; contact with liquids over a longer period can cause discoloration or allow calcium deposits to form on the surface.
  • Page 58 Service and maintenance 10.1 Cleaning Recommended cleaning agents and disinfectants for the monitor: Agent class Tested cleaning and disinfection Further examples agents: Alcohol Ethyl alcohol, 96 % Hospiset cloth Perform advanced Alcohol EP Aldehyde Melsitt Aldasan 2000 Cidex Kohsolin Gigasept FF Chlorine derivatives Terralin Quartamon Med...

  • Page 59: Maintenance

    These photometers can be connected directly to the monitor. Carrying out quality tests automatically All quality tests can be performed automatically by the EIZO QA software. Verifying and calibrating device properties You can verify the device properties and calibrate them if necessary using the photometers.
  • Page 60 Service and maintenance 10.2 Maintenance RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...

  • Page 61: Technical Specifications

    Technical specifications Applicability of technical specifications All technical specifications are valid after a warming-up period of 30 minutes. 11.1 Monitor characteristics Type Color, TFT, S-IPS Image Size 1039.7 mm x 584.8 mm Screen diagonal 47" (119.3 cm) Resolution 1920 x 1080 Refresh rate 60 Hz Pixel arrangement...

  • Page 62: Electronics

    Technical specifications 11.3 Electronics 11.3 Electronics Multi-standard technology Video modes with resolutions less than 1920 x 1024 can be expanded to the TFT resolution, and thus utilize the full display area (like multi-sync CRTs) Interpolation artifacts must be expected when displaying images with a resolution other than 1920 x 1024.
  • Page 63 Technical specifications 11.4 Inputs/Outputs Video input S-Video Via 4-pin mini-DIN socket Composite Via 1x BNC socket Composite & S-Video Video level: 0.5 ... 1.4 V • Sync level: 0.2 ... 0.3 V • Standards PAL (625 lines / 50 Hz) NTSC (525 lines / 60 Hz) Analog signal output RGB input, H/C-Sync input and V-Sync input...

  • Page 64: Controls And Connectors

    Technical specifications 11.5 Controls and connectors 11.5 Controls and connectors Rear side 4x OSD keys • 1x power connection socket • 1x DVI-I socket • 1x 15-pin 3-row Sub-D socket • 2x BNC sockets • 1x 4-pin mini-DIN socket • 2x RS 232 sockets (RJ11) •...

  • Page 65: Mechanical Requirements

    Technical specifications 11.8 Mechanical requirements Transport and storage (packed) Temperature range -20°C ... +55 °C ambient temperature Temperature gradient Max. 5 °C/h, no condensation Humidity 10 ... 95 %, non condensing, at 25 °C Air pressure 240 ... 1060 hPa 11.8 Mechanical requirements Operation...

  • Page 66: Safety Regulations

    Technical specifications 11.9 Safety regulations 11.9 Safety regulations This product has been assigned a CE marking in compliance with the directives of guideline 93/42/EEC of June 14, 1993, concerning medical products. Safety standards EN 60601-1 (Second Edition) • IEC/EN 60601-1 (Third Edition) •...

  • Page 67: Electromagnetic Compatibility

    Technical specifications 11.10 Electromagnetic compatibility 11.10 Electromagnetic compatibility Interference voltage/emitted noise EN 60601-1-2 Class A FCC Class A Burst on power cables EN 61000-4-4 2 kV Burst on signal lines EN 61000-4-4 1 kV Surge on power cables EN 61000-4-5 1 kV symmetric, 2 kV unsymmetric Electrostatic discharge on casing parts (ESD)
  • Page 68 Technical specifications 11.10 Electromagnetic compatibility RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...

  • Page 69: Dimensional Drawings

    Dimensional drawings All dimensions in mm. 12.1 Front view RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...

  • Page 70: View From Left

    Dimensional drawings 12.2 View from left 12.2 View from left RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...

  • Page 71: Rear View

    Dimensional drawings 12.3 Rear view 12.3 Rear view 12.4 View from above RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...
  • Page 72 Dimensional drawings 12.4 View from above RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...

  • Page 73: Appendix

    Appendix Guidance and manufacturer's declaration – electromagnetic emissions The RadiForce® LX470W display is intended for use in the electromagnetic environment specified below. The customer or the user of the display should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment –...

  • Page 74: Markings And Symbols On The Monitor

    Appendix A.2 Markings and symbols on the monitor Markings and symbols on the monitor RadiForce® LX470W Meaning of designations and symbols on the nameplate Designation/symbol Meaning Symbol for "Caution, observe accompanying documents" CE symbol (EU mark of conformity) C-TICK symbol with observation of Australian directives UL symbol with observation of US and Canadian directives Identification as medical device RadiForce®...
  • Page 75 Appendix A.2 Markings and symbols on the monitor Designation/symbol Meaning Identification of IP degree of protection Symbol for manufacturing date of medical products Symbol for "Refer to Instruction Manual" on the rear of the device. WEEE (Waste Electrical and Electronic Equipment) Product must be disposed of separately;...

  • Page 76: Warranty

    Appendix A.3 Warranty Designation/symbol Meaning Symbol for "Off" (voltage) on the power switch. Input for servicing on the rear of the device. Symbol for USB on the rear of the device. Refers to USB ports Symbol for input. Appears on the rear of the device and refers to the various inputs. Symbol for output.

  • Page 77: Accessory Devices

    Devices connected to the monitor (e.g. PC) must also comply with the relevant safety specifications. Trademarks The EIZO Logo is a registered trademark of EIZO NANAO CORPORATION in Japan and other countries. EIZO is a registered trademark of EIZO NANAO CORPORATION in Japan and other countries.

  • Page 78: China Rohs (Restriction Of Hazardous Substances)

    Appendix A.9 China RoHS (Restriction of Hazardous Substances) China RoHS (Restriction of Hazardous Substances) LCD Monitor 液晶显示器 型号 Model: 6GF6260-5FA## 根据SJ/T11364- 2006《电子信息产品污染控制标识要求》特提供如下有关污染控制方面的信息。 The following product pollution control information is provided according to SJ/T11364-2006 Marking for Control of Pollution caused by Electronic Information Products. 电子信息产品污染控制标志说明...
  • Page 79 Appendix A.9 China RoHS (Restriction of Hazardous Substances) 有毒有害物质或元素的名称及含量 Name and Concentration of Hazardous Substances 部件名称 Component Name 有毒有害物质或元素 Hazardous substances’ name 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) 液晶纯平屏幕 LCD Flat Screen 平面灯 Flat Lamp 背光逆变器...
  • Page 80 Appendix A.9 China RoHS (Restriction of Hazardous Substances) RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...

  • Page 81: List Of Abbreviations

    List of abbreviations Abbreviation/symbol Explanation Cathode Ray Tube Display Data Channel German Institute for Standardization DPMS Display Power Management Signaling Digital Visual Interface DVI-A Digital Visual Interface - Analog DVI-D Digital Visual Interface - Digital DVI-I Digital Visual Interface - Integrated Electrostatic Discharge Electromagnetic compatibility European standard...
  • Page 82 List of abbreviations Abbreviation/symbol Explanation Xtended Graphics Array Units of measurement: Cd/m² Candela/m² (photometric measurement for brightness) 3.426 cd/m² RadiForce® LX470W Instruction Manual, 06/2012, 1015263-003...

  • Page 83: Index

    Index Fine adjustment Analog inputs, 49 15-pin Sub-D socket, 27 Digital input, 49 Fully Automated Stability Fully Automated Stability, 16 Accessories, 22 Ambient temperature Operation, 62 Grounding measures, 23 Transport and storage (packed), 63 Ambient temperature range, 19 Analog signal input, 60 Analog signal output, 61 Avoid dusty environments, 19 HDMI socket, 28...
  • Page 84 Index Settings Application-optimizing, 17 Nameplate, 72 Shielding measures, 23 Note specifications on cable installation, 23 Fastening screw, 21 Sub-D socket, 27 Support During installation and for technical questions, 75 Observe EMC requirements when connecting, 23 Order No. RadiForce® LX470W, 15 OSD menu User Cancel locking, 46...

Table of Contents