Attaching Bottom-Support Rails To A Rack - San384C-6 Chassis; Attaching Bottom-Support Rails To A Rack - San768C-6 Chassis - IBM SAN192C-6 Installation, Service And User Manual

Figure 27. Attaching Bottom-Support Rails to a Rack - SAN384C-6 Chassis
Figure 28. Attaching Bottom-Support Rails to a Rack - SAN768C-6 Chassis
3. Repeat Steps 1 and 2 to attach the other bottom-support rail to the rack.
1. Adjustable bottom-support rails (2)
2. M6 x 19 mm (or 12-24 x 3/4 in.) Phillips screws (6 to 8 per rail).
1. M6 x 19 mm (or 12-24 x 3/4 in.) Phillips screws (8 per rail)
2. Adjustable bottom-support rails (2)
Make sure that the two bottom-support rails are level with one another. If they
are not level, adjust the higher rail down to the level of the lower rail. When
the bottom-support rails are installed at the lowest possible RU and are level,
you are ready to install the chassis in the rack or cabinet.
Chapter 3. Installing the IBM c-type SAN Device
57