Ibm Supervisor-1 Module; Ibm Supervisor-1 Module Leds - IBM SAN192C-6 Installation, Service And User Manual

3. Link: management port link status LED
4. MGMT Ethernet: system out of band Ethernet management port
5. ACT: management port packet activity LED
6. Console Serial Port: module serial console port
7. Eject Request: eject request button for USB1 device
8. USB1: usb1 status LED
9. USB1 USB port
10. Slot0: slot0 status LED
11. Eject Request: eject request button for slot0 device
12. Reset: module reset button
13. Module lock release button
14. Status: system diagnostic test status LED
15. System: system environment status LED
16. Active: supervisor redundancy status LED
17. PWR MGMT: system power status LED
18. Management port operational status LED
19. Module ejection lever
20. Slot0 USB port
Table 4 describes the LEDs on the IBM c-type SAN switches and directors
Supervisor-1 Module.
Table 4. IBM Supervisor-1 Module LEDs
LED
ID
Status
Flashing blue
Off
Chapter 1. Introducing the IBM c-type SAN Directors
Description
A user has activated this
LED to allow a person to
find this module in the
chassis.
Location identification is
deactivated for this module.
17