Getting started
3.1 Projector source and control connections
Overview
•
Making connections
•
Connector specifications
•
Control interfaces
3.1.1 Making connections
The source switching time is variable and could take few seconds..
Source signal connectivity
The connector panel at the back of the projector is used for all source connections.
Source signal connectivity on the projector is:
•
2x Dual Link DVI-I (DVI-D functionality)
•
2x DisplayPort 1.2
•
1x HDMI 2.0
•
1x HDBaseT
•
1x SDI input (initially designed for 3G-SDI input signals, 12G-SDI signals are now supported)
3.1.2 Connector specifications
Overview
•
DVI-I
•
Display Port 1.2
•
HDMI 2.0
•
SDI
•
HDBase T
3.1.2.1 DVI-I
Specifications
Parameter
Connector
Signal characteristics
Max. cable length
Max. pixel rate
Scan format
Max. input data resolution
Bit depth
EDID
HDCP
34
601–0443 /03
Balder
Value
DVI-I female digital RGB
DVI 1.0, Digital, TMDS
25 m (24 AWG)
330 MHz (dual link), 165 Mhz (single link)
Progressive
1920x1200 60Hz (Single link), 2560x1600 60Hz
(Dual Link).1920x2400 @60Hz
8 bit
Supported
Supported