Re-Install Cover; Frame R5 Cover Installations - ABB ACH580 Series Installation, Operation And Maintenance Manual

ACH580 Installation, Operation and Maintenance Manual
6. Re-install cover(s)
Frames R1...R4
1. Reinstall the cover: Put the tabs on the cover
top in their counterparts on the housing (1a)
and then press the cover (1b)
2. Tighten the retaining screw at the bottom with
a screwdriver.

Frame R5 cover installations

1. Slide the conduit box upwards (1a)
and tighten the retaining screws
(1b).
2. Install the cover, press it at the
bottom (2a) and tighten the
retaining screws (2b).
7. Install hood, if applicable
IP 55/UL (NEMA) Type 12, Frame R1...R9
Install the hood by following the instructions provided with the hood kit.
1
Hood
1a
2
1b
2
1b
1b
1a
ACH580-01 Installation
43
2a
2b