ABB ACH580 Series Installation, Operation And Maintenance Manual page 122

122
6 Press the Up/Down arrows to change
the Parameter Value.
7 Press ENTER to store the modified
value or press ESC to leave the
Parameter Edit mode.
8 Press ESC to return to the listing of
Parameter Groups, and again to
return to the Main Menu.
9 Press ESC to return to the Default
Display from the Main Menu.
Note: In the Parameter Edit mode the current parameter value appears below the
parameter name.
Note: To view the default parameter value, press the Up/Down arrows
simultaneously. Press Enter to restore the default parameter value or press ESC to
leave the Parameter Edit mode.
ACH580 E-Clipse Bypass
ACH580 Installation, Operation and Maintenance Manual
ENTER
or ESC
ESC ESC
ESC
1601 START/STOP
[ 1:DI1 ]
*1601 START/STOP
1602 PERMISSIVE
*16 SYSTEM CTRL
17 OVERRIDE
DRIVE SELECTED
BYPASS IN OFF