ABB ACH580 Series Installation, Operation And Maintenance Manual page 55

ACH580 Installation, Operation and Maintenance Manual
2
3
4
5
6
7
Select Motor and press
If the control modes is scalar, select Control mode and
press (Select) (or
Select Vector control and press
Warning message Identification run is shown for a
moment.
Check the motor speed limits. The following must be true:
Minimum speed < 0 rpm
Maximum speed = motor rated speed.
Check the motor current as well as torque limits. The
following must be true:
Maximum current > I
HD
Maximum torque > 50%. press next
(Select) (or ).
) and continue to the next step.
(Select) (or ).
ACH580-01 Installation
55