ABB ACH580 Series Installation, Operation And Maintenance Manual page 80

80
Code
(hex)
FF63
FF81
FF8E
ACH580-01 Installation
Fault / Aux. code
0012
0013
STO diagnostics failure.
FB A force trip
EFB force trip
ACH580 Installation, Operation and Maintenance Manual
Cause
Motor too large for Check that the motor and drive sizes
advanced standstill ID are compatible.
run.
Contact your local ABB
representative.
(Asynchronous motors Check that the motor nominal value
only) settings in the drive are the same as
in the motor nameplate.
Motor data error.
Contact your local ABB
representative.
SW internal Reboot the control unit (using
malfunction. parameter 96.08 Control board boot)
or by cycling power.
A fault trip command Check the fault information provided
has been received by the PLC.
through fieldbus
adapter A.
A fault trip command Check the fault information provided
has been received by the PLC.
through the embedded
fieldbus interface.
What to do