Display Function; Monitor Display (Pr. 52 , Pr. 54 ) - Mitsubishi Electric FR-S520E Series Instruction Manual

2.6 Display function

2.6.1 Monitor display (Pr. 52
You can choose the display of the operation panel "monitor/frequency setting
screen".
Parameter Name
Operation panel
52 display data
selection
FM terminal function
54
selection
POINT
•You can also use the
(basic) for the operation procedure.)
•The pulse train output terminal FM is available for signal output. (Make selection
using the Pr. 54 "FM terminal function selection" value.)
<Setting>
Types of Monitor
Output frequency
Output current
When "100" is set in Pr. 52, the monitored values during stop and during operation
differ as indicated below.
0
During running/stop
Output frequency
REMARKS
•During an error, its definition appears.
•During reset, the values displayed are the same as during a stop.
•For selection of the parameter unit (FR-PU04) monitor display, refer to the communication
parameter n16 "PU main display screen data selection". (Page 165)
CAUTION
The unit displayed on the operation panel is only A and other units are not
displayed.
♦
Related parameters
•
Speed display ⇒ Pr. 37 "speed display" (refer to page 90)
•
Adjustment of FM level meter full-scale value ⇒ Calibration parameter C1 "FM terminal calibration"
•
Monitoring reference ⇒Pr. 55 "frequency monitoring reference", Pr. 56 "current monitoring
Factory
Setting
0
0
to change the display. (Refer to the instruction manual
SET
Parameter Setting
Pr. 52
Unit
Operation panel
LED
Hz 0/100
A 1
Pr. 52
During stop
Set frequency
♦
reference" (refer to page 101)
, Pr. 54
Setting
Range
0, 1, 100
Setting is enabled when Pr. 30 = "1"
0, 1
Pr. 54
FM terminal
0
1
100
During running
Output frequency
(refer to page 138)
99

Display function

)
Remarks
Full-Scale Value of FM
Level Meter
Pr. 55 "frequency monitoring
reference"
Pr. 56 "current monitoring
reference"
2