Parameter Unit (Fr-Pu04) Setting; Pu Display Language Selection (N13 ); Pu Buzzer Control (N14 ) - Mitsubishi Electric FR-S520E Series Instruction Manual

Parameter unit (FR-PU04) setting

2.17 Parameter unit (FR-PU04) setting

When the optional parameter unit (FR-PU04) is connected to the RS-485
connector of the inverter, you can make the environment setting of the
parameter unit.
CAUTION
When the parameter unit (FR-PU04) is used, operation from the operation panel
is not accepted. (The stop key (
2.17.1 PU display language selection (n13
By setting the communication parameter n13 "PU display language selection",
you can switch the display language of the parameter unit to another.
Parameter
PU display language
n13 (145)
selection
The parameter numbers in parentheses are those for use with the parameter unit (FR-
PU04).
<Setting>
n13 Setting
0
1
2
3
4
5
6
7
2.17.2 PU buzzer control (n14
By setting the communication parameter n14 "PU buzzer control", you can
control "beep" produced when any of the parameter unit (FR-PU04) keys is
operated.
Parameter
n14 (990) PU buzzer control
The parameter numbers in parentheses are those for use with the parameter unit (FR-
PU04).
STOP
RESET
Factory
Name
Setting
Display Language
Japanese (factory setting)
English
German
French
Spanish
Italian
Swedish
Finnish
Factory
Name
Setting
1
) is valid)
Setting
Range
0 0 to 7 Setting is enabled when Pr. 30 = "1"
)
Setting
Range
0: Without sound
0, 1 1: With sound (factory setting)
Setting is enabled when Pr. 30 = "1"
164
)
Remarks
Remarks