Additional Function; Remote Setting Function Selection (Pr. 59 ) - Mitsubishi Electric FR-S520E Series Instruction Manual

Additional function

2.8 Additional function

2.8.1 Remote setting function selection (Pr. 59
Even if the operation panel is located away from the enclosure, you can use
contact signals to perform continuous variable-speed operation, without using
analog signals.
Acceleration(RH)
Deceleration(RM)
Clear(RL)
Forward rotation
(STF)
Power supply
* External running frequency (other than multi-speed) or PU running frequency
Parameter Name
Remote setting
59
function selection
REMARKS
•By merely setting this parameter, you can use the acceleration, deceleration and setting clear
functions of the motorized speed setter (FR-FK).
•When the remote function is used, the output frequency of the inverter can be compensated
for as follows:
External operation mode
PU operation mode
<Operation panel operation procedure>
Monitor, frequency
setting mode
MODE
* When you have set "1" in Pr. 53 "frequency setting operation selection", you need not
press the
SET
*
ON
ON
ON
ON
Factory
Setting
0
Frequency set by RH/RM operation plus external analog
frequency command
Frequency set by RH/RM operation plus setting dial or PU
digital preset frequency
Turn the setting dial
to make correction.
.
ON
ON
ON
Setting
Range
0, 1, 2 Setting is enabled when Pr. 30 = "1"
104
)
When Pr. 59="2"
When Pr. 59="1"
ON
ON
ON
ON
Remarks
Press the
SET
complete setting.*
to