Features - ST STM32 Nucleo-32 User Manual

Features

1 Features
•
STM32 microcontrollers in 32-pin packages
•
Three LEDs:
–
–
–
• Reset push-button
•
Board expansion connector:
–
• Flexible board power supply options:
–
–
•
On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability:
mass storage, Virtual COM port and debug port
•
Support of a wide choice of Integrated Development Environments (IDEs) including
IAR™ EWARM
•
Arm
a. On Windows
b. Arm and Mbed are registered trademarks or trademarks of Arm Limited (or its subsidiaries) in the US and or
elsewhere.
c. Refer to the https://www.mbed.com website and to
board order codes are supported.
6/37
USB communication LED (LD1)
Power LED (LD2)
User LED (LD3)
Arduino™ Nano
ST-LINK USB V
BUS
External sources
(a) ®
, Keil MDK-ARM
®
Mbed Enabled™ compliant (only for some Nucleo part numbers)
®
only.
(a)
, GCC-based IDEs, Arm
Table 1: Ordering
UM1956 Rev 5
® (b), (c)
Mbed™
information, to determine which Nucleo
UM1956