Product Marking; Ordering Information; Table 1. Ordering Information - ST STM32 Nucleo-32 User Manual

UM1956
2

Product marking

Evaluation tools marked as "ES" or "E" are not yet qualified and therefore they are not ready
to be used as reference design or in production. Any consequences arising from such usage
will not be at STMicroelectronics' charge. In no event, will STMicroelectronics be liable for
any customer usage of these engineering sample tools as reference design or in production.
"E" or "ES" marking examples of location:
• On the targeted STM32 that is soldered on the board (for illustration of STM32 marking,
refer to the section Package information of the STM32 datasheet at www.st.com).
•
Next to the evaluation tool ordering part number, that is stuck or silk-screen printed on
the board.
Some boards feature a specific STM32 device version, which allows the operation of any
bundled commercial stack/library available. This STM32 device shows a "U" marking option
at the end of the standard part number and is not available for sales.
In order to use the same commercial stack in his application, a developer may need to
purchase a part number specific to this stack/library. The price of those part numbers
includes the stack/library royalties.
3

Ordering information

To order the STM32 Nucleo-32 board, refer to
NUCLEO-F031K6
NUCLEO-F042K6
NUCLEO-F301K8
NUCLEO-F303K8
NUCLEO-L011K4
NUCLEO-L031K6
NUCLEO-L412KB
NUCLEO-L432KC
®
1. Arm Mbed Enabled™.
2. Refer to

Table 1. Ordering information

Order code
(1)
(1)
(1)
(1)
(1)
(1)
Chapter 2: Product marking
Table 1.
Reference board
MB1180
for details.
UM1956 Rev 5
Product marking
Target STM32
STM32F031K6T6
STM32F042K6T6
STM32F301K8T6
STM32F303K8T6
STM32L011K4T6
STM32L031K6T6
(2)
STM32L412KBU6U
(2)
STM32L432KCU6U
7/37
36