Supermicro X11SSL-nF User Manual page 59

Manufacturer Mode Select
Close pin 2 and pin 3 of jumper JPME2 to bypass SPI flash security and force the system to
operate in the manufacturer mode, which will allow the user to flash the system firmware from
a host server for system setting modifications. Refer to the table below for jumper settings.
The default setting is Normal.
SAS Status (For -CF models only)
JPS1 allows the user to enable the SAS status indicator at LEDS1. The default setting is
Enabled.See the table below for jumper settings.
BMC
BT1
USB 8 (3.0)
JSTBY1
Intel PCH
2
LED S1
LSI 3008
MEGERAC
LICENSE
USB 4/5
JSAS1 JNVME1
Manufacturer Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 Manufacturer Mode
SAS Status
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
VGA
LAN 2
LAN 1 USB 6/7
(3.0)
LED BMC
1
JPL1
JD1
JPL2
SP1 SP1 JPG1 JPME2
IPMI CODE
JBR1 JPB1
BAR CODE
X11SSL-CF_(-nF)
REV:1.01
Designed in the USA
CPU
FANA FAN3
LED PWR
MAC CODE SAS CODE
59
Definition
Enabled
Disabled
1. Manufacterer Mode
USB 0/1
COM1
FAN4 Select
IPMI_LAN
2. SAS Status
COM2
JTPM1
JI2C2
JI2C1
JF1
Chapter 2: Installation