Supermicro X11SSL-nF User Manual page 58

X11SSL-CF/-nF User Manual
VGA Enable/Disable
Jumper JPG1 allows the user to enable the onboard VGA connector. The default setting is
pins 1-2 to enable the connection. Refer to the table below for jumper settings.The default
setting is Enabled.
BIOS Recovery
Use jumper JBR1 to recover the BIOS settings on the motherboard. Refer to the table below
for jumper settings. The default setting is Normal.
BMC
JSTBY1
Intel PCH
LSI 3008
MEGERAC
LICENSE
JSAS1 JNVME1
VGA Enable/Disable
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
BIOS Recovery
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 BIOS Recovery
VGA
LAN 2
LAN 1
LED BMC
JD1
JPL2
SP1 SP1
IPMI CODE
BT1
BAR CODE
X11SSL-CF_(-nF)
USB 8 (3.0)
REV:1.01
Designed in the USA
CPU
LED S1
USB 4/5
FANA FAN3
LED PWR
MAC CODE SAS CODE
Definition
Enabled
Disabled
1. VGA Enable
USB 6/7 USB 0/1
COM1
(3.0)
FAN4
2. BIOS Recovery Enable
IPMI_LAN
COM2
1 JTPM1
JPL1
JPG1 JPME2 JI2C2
JBR1 JPB1 JI2C1
2
JF1
58