Supermicro X11SSL-nF User Manual page 115

The file system supported by the recovery block is FAT (including FAT12, FAT16, and FAT32),
which is installed on a bootable or non-bootable USB-attached device. However, the BIOS
might need several minutes to locate the SUPER.ROM file if the media size becomes too
large due to the huge volumes of folders and files stored in the device.
To perform UEFI BIOS recovery using a USB-attached device, follow the instructions below:
1. Using a different machine, copy the "Super.ROM" binary image file into the Root "\"
directory of a USB device or a writable CD/DVD.
Note 1: If you cannot locate the "Super.ROM" file in your drive disk, visit our website
at www.supermicro.com
image into a USB flash device and rename it "Super.ROM" for BIOS recovery use.
Note 2: Before recovering the main BIOS image, confirm that the "Super.ROM" bi-
nary image file you download is the same version or a close version meant for your
motherboard.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
drive and reset the system until the following screen appears:
Note: On the other hand, if the following screen displays, please load the "Super.
ROM" file to the root folder and connect this folder to the system. (You can do so by
inserting a USB device that contains the new "Super.ROM" image to your machine
for BIOS recovery.)
to download the BIOS package. Extract the BIOS binary
115
Appendix D: UEFI BIOS Recovery