Installing The Series 8 Iota On The Panel; Prerequisites; Considerations; Mounting The Iota - Honeywell Series 8 I/O User Manual

3.3

Installing the Series 8 IOTA on the Panel

Prerequisites

Panel for mounting IOTA is installed in a cabinet or desired mounting location.

Power supply is installed.

All wiring and pre-fabricated cables are available and labeled as applicable.

Ensure all power is turned off at the installation location.

You have the mounting hardware supplied with the components.

Considerations

You can use a redundant IOTA to support a non-redundant Series 8 IOM application.
Ensure to install the non-redundant Series 8 IOM in the upper IOM location on the
IOTA.
Ensure the enclosure is connected to a protective earth ground using #8 AWG solid
copper wire.

Mounting the IOTA

Step

1 Select desired mounting location on carrier and align mounting holes in
IOTA with screw-hole locations on the carrier. Ensure component side of
IOTA is facing up.
IOTA Model Number
8X-TCNTA1
8X-TAIXA1
8X-TAIXB1
8X-TAIDA1
8X-TAIDB1
8X-TAOXA1
8X-TAOXB1
8X-TAIMA1
8X-TDILA1
8X-TDILB1
8X-TDODA1
R500
April 2017
3. Series 8 I/O Installation and Upgrades
3.3. Installing the Series 8 IOTA on the Panel
Action
Size
9 inch
6 inch
12 inch
9 inch
12 inch
6 inch
12 inch
9 inch
9 inch
12 inch
9 inch
Series 8 I/O User's Guide
Honeywell
Number of Screws
6
4
6
6
6
4
6
5
5
6
5
43