Honeywell Series 8 I/O User Manual page 71

Channels

For channel1 Contains the following:
through16 non-

redundant 9 inch
IOTA

R500
April 2017
4.2. Differential Analog input IOTA (Models 8X-TAIDA1 and 8X-TAIDB1)
The jumper must be cut if the voltage transmitters (1-5V) are connected
to the channel.
A corresponding jumper. Therefore, the jumper for channel 1 is JP1,
and so on.
The jumper must be cut if the voltage transmitters (1-5V) are connected
to the channel.
Series 8 I/O User's Guide
Honeywell
4. Series 8 IOTA Pinouts
Signal screw
71