Inspecting Channel Function Blocks; Defining Module Containment; Table 5 Series 8 I/O Channel Function Blocks - Honeywell Series 8 I/O User Manual

2. Series 8 I/O Planning and Design
2.6. Supported Series 8 I/O options

Digital Input Pulse Accumulation

Inspecting channel function blocks

The Series 8 I/O Channel function blocks are as follows:
Channel block name
AICHANNEL
AOCHANNEL
DICHANNEL
DOCHANNEL
Digital Input Pulse
Accumulation_DI

Defining module containment

An individual channel within a Series 8 I/O block is often abbreviated as an IOC block.
While an IOC block must be "contained in" a Control Module (CM) in Control Builder,
the IOC block actually resides within the associated IOM device. That is, you change the
execution state (EXECSTATE) of a CM independent of the IOC's point execution state
(PTEXECST).
34

Table 5 Series 8 I/O channel function blocks

Associated with IOM blocks

Analog Input with HART

Analog Input

TC/RTD

Analog Output

Analog Output With HART

Digital Input 24VDC

Digital Input Sequence of
Events

Digital Output 24VDC

Digital Input Pulse
Accumulation
Series 8 I/O User's Guide
Honeywell
R500
April 2017