Using the drag and drop method
To add an IOM to the Project tab by the drag and drop method, perform the following
steps.
Step
1
Drag an IOM icon from the Library tab to an open area on the Project tab.
Name New Function Block(s) dialog box appears.
2
Accept or type a new tagname in the Destination column.
3
Click Finish. The IOM is displayed in the Project tab.
TIP
IOM names can be up to 16 characters long.
6.2
Assigning an IOM to an IOLINK in the Project tab
Using the Assignment dialog box
To assign an IOM to an IOLINK function block using the Assignment dialog box,
perform the following steps.
Step
1
Click the Assign button
Assignment dialog box appears.
R500
April 2017
6.2. Assigning an IOM to an IOLINK in the Project tab
Action
Action
in the toolbar. The Execution Environment
Series 8 I/O User's Guide
Honeywell
6. Series 8 I/O Configuration
159