5.16 Configuring Hart Status Tab - Iom Block; Configuring Modules Hart - Status Tab - Honeywell Series 8 I/O User Manual

5.16 Configuring HART Status tab - IOM block

Configuring modules HART - Status tab

The following configuration information pertains to the HART Status tab for the
following modules:

ANALOG INPUT WITH HART

ANALOG OUTPUT WITH HART
Prerequisites

Control Builder is running

A Series 8 I/O control module was created
Considerations
Note: No user-defined configuration setting on the HART Status tab and there are no
configuration items in HART status tab.

All illustrations used in the procedure are for example purposes only.
The following is an example of an ANALOG INPUT WITH HART Block,
Configuration form - HART Status tab.
R500
April 2017
5. Series 8 I/O Configuration Form Reference
5.16. Configuring HART Status tab - IOM block
Series 8 I/O User's Guide
Honeywell
137