Table of Contents
Advertisement
5. Internal Memory
5.3. Operation parameter setting area
The area shows the same results of filter constant configuration in I/O parameter
3.
setting window.
Averaging method setting area (address 10~13); average processing
1.
If set as 4 and over, 0 (sampling) is set internally; %UXa.b.24 ~ 27 (setting error
flag) is ON (the bit, 2 setting error information area (address 60 ~ 63) is ON.
2.
The averaging method setting area is equivalent to the averaging configuration in
I/O parameter setting window as shown in the following figure.
78
Isolated Thermocouple Input Module TC4S User's Guide
Honeywell
R200
September 2010
Advertisement
Table of Contents
