Translation Of Original Declaration Of Incorporation - SCHUNK TANDEM KSPplus-BWM Assembly And Operating Manual

12
in terms of the Directive 2006/42/EG, Annex II, Part 1.B of the European Parliament and of
the Council on machinery.
Manufacturer/
Distributor
We hereby declare that on the date of the declaration the following partly completed
machine complied with all basic safety and health regulations found in the directive
2006/42/EC of the European Parliament and of the Council on machinery. The declaration
is rendered invalid if modifications are made to the product.
Product TANDEM Clamping force block pneumatic
designation: KSP plus 100-BWM; KSP-LH plus 100-BWM; KSP-Z plus 100-BWM; KSP-
LH-Z plus 100-BWM; KSP plus 160-BWM; KSP-LH plus 160-BWM; KSP-Z
plus 160-BWM; KSP-LH-Z plus 160-BWM; KSP plus 250-BWM; KSP-LH plus
250-BWM; KSP-Z plus 250-BWM; KSP-LH-Z plus 250-BWM
ID number 0405203; 0405223; 0405205; 0405225; 0405303; 0405323; 0405305;
0405325; 0405503; 0405523; 0405505; 0405525
The partly completed machine may not be put into operation until conformity of the ma-
chine into which the partly completed machine is to be installed with the provisions of the
Machinery Directive (2006/42/EC) is confirmed.
Applied harmonized standards, especially:
EN ISO 12100:2010
EN ISO 4414:2010
Other related technical standards and specifications:
VDI 3035:2008-05
The manufacturer agrees to forward on demand the relevant technical documentation for
the partly completed machinery in electronic form to national authorities.
The relevant technical documentation according to Annex VII, Part B, belonging to the
partly completed machinery, has been created.
Person authorized to compile the technical documentation:
Philipp Schräder, Address: see manufacturer's address
Mengen, November 2017
02.00|KSPplus-BWM KSP-LHplus-BWM KSP plus 100-BWM; KSP-LH plus 100-BWM; KSP-Z
plus 100-BWM; KSP-LH-Z plus 100-BWM; KSP plus 160-BWM; KSP-LH plus 160-BWM;
Translation of the original declaration of incorporation

Translation of original declaration of incorporation

H.-D. SCHUNK GmbH & Co. Spanntechnik KG
Lothringer Str. 23
D-88512 Mengen
Safety of machinery - General principles for design -
Risk assessment and risk reduction
Pneumatic fluid power – General rules and safety requirements
for systems and their components
Design of machine tools, production lines and peripheral equip-
ment for the use of metalworking fluids
p.p. Philipp Schräder; Head of Engineering Design
49