Changing Jaws Wtr, Wtg; Wtr Changing Jaws - SCHUNK TANDEM KSPplus-BWM Assembly And Operating Manual

Assembly/Function
Changing jaw type: WTG
The WTG changing jaw can be used with clamping bars and re-
versible gripping jaws to clamp raw parts. The reversible gripping
jaws and clamping bars are suited for three- or four-point clamp-
ing of cylindrical and rectangular workpieces (see clamping jaw
( 11, Page
interface design 47)).
The interface can be individually adjusted to the workpiece dimen-
sions with the WTG grid holes. The various jaw steps combined
with the grid hole distances allow virtually all workpiece dimen-
sions within the limited clamping range to be clamped.
7.5

Changing jaws WTR, WTG

7.5.1

WTR changing jaws

Soft and undrilled.
Mounted to TANDEM KSP plus-BWM standard stroke and long
stroke with quick-change interlocking.
Made out of hardenable 16MnCr5. Workpiece-specific adjusting
possible by machining under clamping pressure.
Bore holes and clamping contours can be made to order.
WTR changing jaw
27
02.00|KSPplus-BWM KSP-LHplus-BWM |en