Table of Contents
Advertisement
12
in terms of the Directive 2006/42/EG, Annex II, Part 1.B of the European Parliament and of
the Council on machinery.
Manufacturer/
Distributor
We hereby declare that on the date of the declaration the following partly completed
machine complied with all basic safety and health regulations found in the directive
2006/42/EC of the European Parliament and of the Council on machinery. The declaration
is rendered invalid if modifications are made to the product.
Product designation:
Type designation
ID number
The partly completed machine may not be put into operation until conformity of the
machine into which the partly completed machine is to be installed with the provisions of
the Machinery Directive (2006/42/EC) is confirmed.
Applied harmonized standards, especially:
EN ISO 12100:2011-03 Safety of machinery - General principles for design - Risk
DIN EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements
Other related technical standards and specifications:
VDI 3035:2008-05
The manufacturer agrees to forward on demand the relevant technical documentation for
the partly completed machinery in electronic form to national authorities.
The relevant technical documentation according to Annex VII, Part B, belonging to the
partly completed machinery, has been created.
Person authorized to compile the technical documentation:
Philipp Schräder, Address: see manufacturer's address
Mengen, January 2016
Translation of original declaration of incorporation
Translation of original declaration of incorporation
H.-D. SCHUNK GmbH & Co. Spanntechnik KG
Lothringer Str. 23
D-88512 Mengen
TANDEM clamping block, spring-tensioned
KSF plus 100; KSF-Z plus 100; KSF plus 140; KSF-Z plus 140;
KSF plus 160; KSF-Z plus 160; KSF plus 250; KSF-Z plus 250;
KSF-LH plus 100; KSF-LH-Z plus 100; KSF-LH plus 140; KSF-LH-
Z plus 140; KSF-LH plus 160; KSF-LH-Z plus 160; KSF-LH plus
250; KSF-LH-Z plus 250; KSF-F plus 100; KSF-F-Z plus 100; KSF-
F plus 140; KSF-F-Z plus 140; KSF-F plus 160; KSF-F-Z plus 160;
KSFP-F plus 250; KSF-F-Z plus 250
0405260; 0405262; 1330220; 1330221; 0405360; 0405362;
0405560; 0405562; 0405280; 0405282; 1330222; 1330223;
0405380; 0405382; 0405580; 0405582; 0405270; 0405272;
1330224; 1330225; 0405370; 0405372; 0405570; 0405572
assessment and risk reduction
for systems and their components
Design of machine tools, production lines and peripheral
equipment for the use of metalworking fluids
p.p. Philipp Schräder; Head of Engineering Design
03.00|KSF plus, KSF-LH plus, KSF-F plus |en
45
Advertisement
Table of Contents
