3
Warranty
The warranty period is 24 months after delivery date from factory
or 500 000 cycles*, if it is used as intended, under the following
conditions:
• Observe the applicable documents
• Observe the ambient conditions and operating conditions
• Observance of the specified care and maintenance instructions
( 9, Page 34)
Parts touching the workpiece and wear parts are not included in
the warranty.
* A cycle consists of a complete clamping process
("Open" and "Close").
4
Scope of Delivery
KSP plus-BWM or KSP-LH plus-BWM clamping block
(changing jaws, reversible gripping inserts and clamping bars not
included)
ACCESSORY PACK:
(for contents, see chapter accessory packs
4.1
Accessories
(see catalog or data sheets when ordering separately)
Changing jaw type: WTR, WTG (see chapter "WTR, WTG changing
( 7.5, Page
jaws"
Reversible gripping inserts for WTR, WTG
Clamping bars for WTR, WTG
TANDEM base plates
Valves, pneumatic screws
Hexagonal socket screwdriver
Warranty / Scope of Delivery
( 1.2, Page 6)
27))
02.00|KSPplus-BWM KSP-LHplus-BWM |en
( 10.2, Page
40))
13