Table of Contents
Advertisement
Basic safety notes
Checking the behavior of personnel
The operator must at least occasionally check that the personnel
are behaving in a safety conscious manner and are aware of the
potential hazards.
Danger signs
The operator must ensure that the signs concerning safety and
hazards mounted on the machine where the clamping block is
mounted are clearly legible and are observed.
Faults
If a fault occurs on the clamping block which endangers safety or
if a problem is suspected due to production characteristics, the
machine where the clamping block is mounted must be immedi-
ately stopped and remain shut down until the fault has been
located and remedied. Only allow specialists to remedy faults.
Spare parts
Only use original SCHUNK spare parts.
Environmental regulations
The applicable environmental regulations must be observed for all
maintenance and repair work.
The use of petroleum ether is prohibited. It is extremely flam-
mable, can build up an electrostatic charge and can form an
explosive gas air mixture. When selecting greases and lubricating
oils, pay attention to environmental compatibility, health risks,
disposal regulations and to local options for disposal according to
regulations.
2.7
Using personal protective equipment
When using this product, you must comply with the relevant
health and safety at work rules and you must use the required
personal safety equipment (minimum: category 2).
12
02.00|KSPplus-BWM KSP-LHplus-BWM |en
Advertisement
Table of Contents
