Translation Of The Original Declaration Of Incorporation - SCHUNK KSP3-IM 100 Assembly And Operating Manual

10 Translation of the original declaration of
in terms of the Directive 2006/42/EG, Annex II, Part 1.B of the European Parliament and of
the Council on machinery.
Manufacturer/
Distributor
We hereby declare that on the date of the declaration the following partly completed
machine complied with all basic safety and health regulations found in the directive
2006/42/EC of the European Parliament and of the Council on machinery. The declaration
is rendered invalid if modifications are made to the product.
Product designation:
Type designation:
ID number
The partly completed machine may not be put into operation until conformity of the
machine into which the partly completed machine is to be installed with the provisions of
the Machinery Directive (2006/42/EC) is confirmed.
Applied harmonized standards, especially:
DIN EN ISO
12100:2011-03
DIN EN ISO
4414:2011-04
The manufacturer agrees to forward on demand the relevant technical documentation for
the partly completed machinery in electronic form to national authorities.
The relevant technical documentation according to Annex VII, Part B, belonging to the
partly completed machinery, has been created.
Person authorized to compile the technical documentation:
Philipp Schräder, Address: see manufacturer's address
Mengen, December 2022

Translation of the original declaration of incorporation

incorporation
H.-D. SCHUNK GmbH & Co. Spanntechnik KG
Lothringer Str. 23
D-88512 Mengen
TANDEM clamping force block, pneumatic (with inductive
proximity switches)
KSP3 IM, KSP3-LH IM
1467375, 1467555 - 1467569, 1467580 - 1467589, 1467620,
1467590 – 1467594, 1507027, 1507028, 1507040 – 1507045,
1507052 – 1507056, 1507058 - 1507060
Safety of machinery - General principles for design -
Risk assessment and risk reduction
Fluid technology – General rules and safety requirements for
pneumatic systems and their components
p.p. Philipp Schräder; Head of Engineering Design
03.00 | KSP3-IM, KSP3-LH-IM | TANDEM Clamping Block | en | 1474090 47