Removing The Changing Jaws From The Quick-Change Interface - SCHUNK TANDEM KSPplus-BWM Assembly And Operating Manual

Assembly/Function
7.4.2
Two-handed
24 02.00|KSPplus-BWM KSP-LHplus-BWM |en

Removing the changing jaws from the quick-change interface

The jaws can be removed in two ways:
1. Two-handed:
Unlock the jaws with a one-quarter counter-clockwise turn from
the hexagonal screwdriver at one of the side access points. At the
same time, lift the jaw diagonally from the center upward and out
of the change interface.