Table of Contents
Advertisement
Chapter 6. Service Request Function
6.26 SVC_REQ 25: Disable/Enable EXE Block and Standalone C
Program Checksums
Use SVC_REQ 25 to enable or disable the inclusion of EXE in the background checksum calculation.
The default is to include the checksums.
This service request uses only an input parameter block.
Address 0 = Disable C applications inclusion in checksum calculation
1 = Enable C application inclusion in checksum calculation
The parameter block is unchanged after execution of the service request.
SVC_REQ 25 Example
When the coil TEST transitions from OFF to ON, SVC_REQ 25 executes to disable the inclusion of EXE
blocks in the background checksum calculation. When coil TEST transitions from ON to OFF, the
SVC_REQ executes to again include EXE blocks in the background checksum calculation.
324
PACSystems* RX7i, RX3i and RSTi-EP CPU Programmer's Reference Manual
GFK-2950C
Advertisement
Table of Contents
