GE PACSystems RX7i Cpu Programmer's Reference Manual page 435

Hide thumbs Also See for PACSystems RX7i:
Table of Contents

Advertisement

Chapter 9. Diagnostics
All Others, CPU Internal System Error
An internal system error has occurred that should not occur in a production system.
Correction
Display the Controller Fault Table on the programmer. Contact Technical Support and give them all
the information contained in the fault entry.
Error
DEVICE_NOT_AVAILABLE
BAD_DEVICE_DATA
DEVICE_RW_ERROR
FLASH_INCOMPAT_ERRO
R
ITEM_NOT_FOUND_ERRO
R
420
PACSystems* RX7i, RX3i and RSTi-EP CPU Programmer's Reference Manual
Fault Extra
Description
Data Value
(First Byte)
CF
Specific device is not available in the system.
Data stored on device has been corrupted and is no longer
CC
reliable. Or, Flash Memory has not been initialized.
CB
Error occurred during a read/write of the Flash Memory
device.
8E
Data in Flash Memory is incompatible with the CPU firmware
release due to the CPU firmware revision numbers, the
instruction groups supported, or the CPU model number.
8D
One or more specified items were not found in Flash Memory.
GFK-2950C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pacsystems rx3iPacsystems rsti-ep

Table of Contents