Power Supply; Configuring The Unit; Display Information - Badger Meter FC-5000 User Manual

Flow display. industrial flow computer

Hide thumbs Also See for FC-5000:

Table of Contents

Description

Power Supply

The power supply used must be isolated from mains by double or reinforced

insulation (for instance, SELV power supply)�

The FC-5000 Flow Display operates on 10...40V DC or 9...28V AC supplied by any

suitable source that also meets the requirement listed above� Badger Meter has

power supplies available for the FC-5000 Flow Display�

Power Supply Part Numbers:

• 68334-001: includes wall mount (wall wart) power supply and various adapters

• 68334-002: power module that allows discrete power wiring

A power supply not sourced from the factory must be capable of supplying a

minimum of 8 Watts�

The FC-5000 Flow Display is designed for many types of applications� See

"Advanced Setup" on page 29

FC-5000 Flow Display to your specific requirements�

All information is stored in EEPROM memory and will not be lost in the event of

power failure�

The FC-5000 Flow Display has a large transflective LCD with a bright LED backlight

that displays symbols and digits for measuring units, status information and

keyword messages� See

Page 8

for instructions on configuring your

"Units" on page

27�

CTL-UM-02765-EN-01

June 2018

Table of Contents