Badger Meter FC-5000 User Manual page 38

Troubleshooting
Problem Possible Causes
1� Relay 1 or/and Relay 2
2� The rate or total values
Alarm
notification
from the Home
screen
THERE ARE NO FIELD-REPLACEABLE PARTS INSIDE. OPENING THE UNIT WILL VOID ALL
WARRANTIES.
If a repair or evaluation from the factory is required, call your local representative
or the factory to obtain a Return Material Approval (RMA)�
The shipping address, RMA number and any other required information will be
provided to send the unit to an appropriate location�
Company Website
Customer Service Email
Customer Service Number
Page 38
are latched
indicated on the Home
Screen are in an overrun
condition (value exceeds
8 digits)
Table 23: Troubleshooting
Table 24: Contact information
CTL-UM-02765-EN-01
Oemedies
1� See "Clearing a Latched Relay" on
page 26�
2� Change the unit of measure
associated with the parameter
"Unit of Measure" on page
(see
27) or reset the totalizer (see
"Resets" on page
www�badgermeter�com
indorders@badgermeter�com
(877) 243–1010
25)�
June 2018