PortaSonic 9000 and components
2.3.4
Ultrasonic coupling gel
The ultrasonic coupling gel will be applied between the ultrasonic sensor
and the pipe to ensure the optimum signal input.
2.3.5
Temperature probe PT100
For the heat or cold quantity calculations, the temperatures within the
heating or cooling circuits are measured by means of temperature probes
to be buckled on.
2.3.6
Analogue output cable 4-20mA (4 alligator clips)
By means of the analogue output cable, it is possible, for example, to
connect an external recorder to your converter to transmit measured values
like flow, heat capacity, etc.
2.3.7
Connecting cable for the internal potential-free relay (2 crocodile clips)
By means of the relay connecting cable, it is possible, for example, to
connect an external recorder to your converter in order to transmit counting
values like volume or heat quantity.
2.3.8
Power supply unit (100-240V, 47-63Hz, 1A)
The power supply unit is usually used to load the rechargeable battery. It is
of course also possible to use it for a continuous mains supply of your
PortaSonic 9000.
UF_PS9000_BA_02_1108
4 / 55