Instructions for Kit #JM-4600
□
6. Tape together (no glue) two Inset Walls and
two Porch Spacers (the spacers are between the Inset
Walls). Spread glue on the edge of the Inset Walls only.
The Clapboard faces in and
down on all three walls!
□
7. Glue and tape the Foundation Back (27") and
Sides (15
1
/
") together and to the Base Floor, Tight in the
2
Grooves and lined up at the edges. (Illustration #6)
□
8. Glue and tape Foundation Spacers (8
Foundation and Base Floor as shown. (Illustration #7)
Illus. #7
Foundation Spacers
Assemble the Front Sets (Front Wall and Inset Walls)
Illustrations #5
The "Spacers" are temporary
Assemble the Base (the Base Floor and Foundation)
7
/
16
8
7
/
8
7
/
"
16
16
Glue and tape the Front Wall to the Inset Walls, lined up top-
and-bottom". When the glue is dry, remove the Spacers and
use them to assemble the second Front Set. (Illustration 5)
15
1
/
") to the
The Base Floor up-side-down
"
Front Sets and Foundation (1) page 10
The Clapboard faces
into the porch
Porch Spacer
Inset Wall
Front Wall
Porch Spacer
27"
15
"
2
Inset Wall
Illus. #6
Foundations
1
/
"
2