Real Good Toys Victorian Painted Lady Instructions Manual page 22

Instructions for kit #JM-4600
□
37. Lay out and tape together the Tower Back Walls.
□
38. Glue and tape the Tower Back Walls to the Roof, lined up with
the cutout. Tape the Tower Back-Right to the front edge of the Roof lined up
with the corner of the cutout (Illus. #37A) (this tape will be removed shortly).
Tape the Tower Back-Left to the Bay Walls (Illus. #37B). Adjust and tape
the Tower Back-Ctr. to the Roof, lined up or parallel with the edge.
Continue to step #38 without letting the glue dry
Illus. #37B
Tower Back-Left
Lined up here
□
39. Tape together a set of Top Bay Walls. (Illus. #38A)
Glue Bay Verticals to the edge of the Tower Back-Left and the face
of the Attic Front.
Glue and tape the Top Bay Walls together, to the Bay Verticals, and to
the Tower Back, Roof, and Attic Front (the in-the-way piece of tape
(step 37) has to be removed).
Hold a Yard Stick against the Bay Walls and make the top straight
with the lower Bay. (Illus. #38B) The most important fits are:
• The Bay is straight
• The Top Bay Walls touch the Bay Verticals.
Put Bay Vertical Corners between the Bay Walls to hold the spacing
while the glue dries.
Illustration #36
Tower Back Walls
Tower Back-Ctr.
Tower Back-Left
Lined up here
Illustration #38A: Top Bay Walls
Illus. #38B
Top Bay Walls
Bay Verticals
Tower (3) page 22
Illus. #37A
Lined up
here
Tower Back-Right
Lined up here
Yard Stick